The dataset covers the environmental impacts of oil and natural gas extraction and transportation to coastal facilities. This process includes both the extraction phase and the onshore processing phase. It encompasses methane emissions (fugitive emissions, flaring) in specific regions, produced water discharges, and direct energy use during oil extraction, including drilling, oil pumping, steam injection, and flaring. Flaring refers to the practice in oil and gas production where combustible waste gases generated during various production processes are directed to a flare or thermal oxidizer system for incineration. In addition, emissions from oil spills associated with drilling and pumping operations are included in this inventory, but crude oil leaks related to transportation and refining are not included. Crude oil and natural gas production are often closely linked, requiring material allocation, typically based on energy content to ensure scientific fairness and rational distribution. Heavy oil reservoirs refer to reservoirs where the viscosity of the stored crude oil exceeds 50 mPa·s under reservoir conditions. Due to high viscosity and poor fluidity, heavy oil is difficult to extract. Heavy oil fields with <70% water cut refer to those with produced fluid water content below 70%; this section assumes a water cut of 60%. The net calorific value of crude oil is 43.4 MJ/kg, with an average heating value of natural gas at 36 MJ/Sm³. Modeled using representative data from production technologies that reflect the average production level in China. This dataset is based on literature data and has been optimized and modeled using the best available information as of 2023.